A table holder for a load cell, that can be mounted directly on a table.

I use it for a filament scale, however you can basicly mount anything on the load cell itself.

On the photo is a small spool holder mounted, you can download that from: [https://www.thingiverse.com/thing:4047214](https://www.thingiverse.com/thing:4047214)

Used loadcell: [https://nl.banggood.com/HX711-Module-+-20kg-Aluminum-Alloy-Scale-Weighing-Sensor-Load-Cell-Kit-p-1112121.html?p=W21709980091201412J3&custlinkid=1438764](https://nl.banggood.com/HX711-Module-+-20kg-Aluminum-Alloy-Scale-Weighing-Sensor-Load-Cell-Kit-p-1112121.html?p=W21709980091201412J3&custlinkid=1438764)

Mounting holes are designed for M3 screws, however the load cell might only take M4, in which case you should use a small nut to mount it to the load cell.

There are two version, one is with 1 mounting screw for the table, and one with 2 mounting screws. Depending on the weight you want to put on it, you should choice the right one :)

Print instructions

On my printer, I do need to resize the screw to around 94% in x and y direction to properly work, otherwise the fit is too small.