A long case with a slide on locking band - now with 1 less dovetail for easier operation!

[https://youtu.be/ia2_srxa-og](https://youtu.be/ia2_srxa-og)

Printing

• No supports needed.
• This is a very tall print, add brim if bed adhesion is an issue.
• In some cases, printing with extra perimeters will result in a stronger and faster print.
• The top of the case includes a long bridge, print accordingly.

Case Options

• Default Case
• Case with Divider

Band Options

• Band Plain
• Band Stripes
• Band Hex Holes (Difficult to print)
• Band Hex Indents

Band Clearance Options

Printing the bands with the default clearance is recommended.

• Loose - 0.45mm
• Default - 0.25mm
• Tight - 0.15mm

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Slide Lock Case (Updated)" (https://3dprinty.xyz/project/46) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).