update 27/2/2025

There are 2 versions (iphone 14 PRO and iphone 15) Designed for the Vortex Viper scope.
I have uploaded the step and F3D files in case you want to modify the design for a different phone or different spotting scope. If you do, please upload as a remix. Thanks!

Quickly press the mount on the scope and snap your phone in place. Installation in a matter of seconds.

I had best results of the eye relief on the scope was extended out by 4-5 clicks.

I have the original Apple case on the phone but should work with other cases or without case.

May work with other iPhones, if they have the same camera layout and camera position relative to the magsafe magnets. May work with other scopes, if the diameter is 56 ish mm.

There is one piece of extra hardware you need to buy to make this work, which are the magsafe magnets.

I bought these, but you will definitely find others on amazon.

[https://www.aliexpress.com/item/1005005025312376.html?spm=a2g0o.productlist.main.23.129458e0DEr8VL&algo_pvid=2b528272-44db-4111-9d4f-9b47952aa5ba&algo_exp_id=2b528272-44db-4111-9d4f-9b47952aa5ba-11&pdp_npi=3%40dis%21USD%215.67%214.48%21%21%215.67%21%21%40212278bd16898716533673785d073b%2112000031377176218%21sea%21CZ%21139762196&curPageLogUid=sawTq9eoS0wO](https://www.aliexpress.com/item/1005005025312376.html?spm=a2g0o.productlist.main.23.129458e0DEr8VL&algo_pvid=2b528272-44db-4111-9d4f-9b47952aa5ba&algo_exp_id=2b528272-44db-4111-9d4f-9b47952aa5ba-11&pdp_npi=3%40dis%21USD%215.67%214.48%21%21%215.67%21%21%40212278bd16898716533673785d073b%2112000031377176218%21sea%21CZ%21139762196&curPageLogUid=sawTq9eoS0wO)

PS: the F3D file for the iphone 14 pro is a bit screwed, i accidentally modelled if mirrored, so the last step is to mirror the body and you then print the mirrored body. :-) The step and STL files i uploaded are correct.