HueForge Fire Dragon created for the Polymaker Fire Color Set. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Fire Color Set:

• Panchroma Matte PLA Charcoal Black Transmission Distance: 0.3

• Polymaker PolyLite PLA Red Transmission Distance: 1.5

• Polymaker PolyLite PLA Orange Transmission Distance: 7.5

• Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5

• Polymaker PolyLite PLA White Transmission Distance: 5

Swap Instructions:

• Start with Matte Charcoal Black

• At layer #9 (0.8mm) swap to PolyLite Red

• At layer #12 (1.04mm) swap to PolyLite Orange

• At layer #21 (1.76mm) swap to PolyLite Lemon Yellow

• At layer #31 (2.56mm) swap PolyLite White for the rest.