AI produced photo of an Eagle, processed with HueForge software, and printed on a Bambu Lab X1C printer using the settings below.  The included photo is the 75x75 small version, also included is a 200x200 large version which I have not printed myself.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Sunlu Black Transmission Distance: 0.3
Inland Silver Transmission Distance: 2.5
Overture White Transmission Distance: 6

Swap Instructions:
Black until layer #5 at 0.48mm
Silver until layer #10 at 0.88mm
White for the rest.