Estás en 3DFinder
Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.
Descripción
Wool Comb
A simple and functional comb for combing wool
You only need nails from the hardware store, M3 screws and M3 heat inserts.
I used nails measuring 3.1x80mm, which work best for me. In the future, I will also create a version for a smaller nail diameter.
A simple procedure to clean wool:
- Remove impurities from the wool
- Soak the wool in water with a little soap and let it soak overnight
- Change the water about 5 times (until the water is clear) - Allow to soak for ten minutes after each change
- Wring it out in hands and lay it out on a drying rack and let it dry for about 2 days
- When the wool is dry, use a combs to comb the wool.
23
Me gusta
95
Descargas
Categoría
Outdoor & Garden
Etiquetas
sheep
comb
wool
woolmakers
woolcomb
Licencia
Creative Commons — Attribution — Noncommercial — Share Alike
Archivos (4)
wool_new_2.stl
568.1 KB
wool2.stl
571.1 KB
wool_new_1.stl
4.3 MB
wool1.stl
4.2 MB
¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.
Crear cuenta