This is a frame to mount two P2.5 64x32 led video panels side by side for use in a pinball machine. The first layer is solid because I had better bed adhesion when the print head wasn't skipping around to layout the holes. The openings are easily cut out with an x-acto knife after printing. The center mounting hole is modeled to take an 8/32 nut and screw so if there is any flex in the panel when mounted it can be leveled out.

I used this to build a pin2dmd color display: www.pin2dmd.com

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: solutech3d pla black

Category: Electronics