Summary

Mickey Mouse is an American cartoon character co-created in 1928 by Walt Disney and Ub Iwerks. The longtime mascot of The Walt Disney Company, Mickey is an anthropomorphic mouse who typically wears red shorts, large yellow shoes, and white gloves.

Taking inspiration from silent film personalities such as Charlie Chaplin's Tramp, Mickey is traditionally characterized as a sympathetic underdog who gets by on pluck and ingenuity in the face of challenges much bigger than himself.

The character’s status as a small mouse is personified through his diminutive stature and falsetto voice, the latter of which was originally provided by Disney.

Mickey is one of the world's most recognizable and universally acclaimed fictional characters of all time.

Print Instructions:

Supports: Yes (See below)

Resolution: .2mm

Infill: 10%

Model is 23cms tall

Notes:
Refer to the notes below for a few helpful printing and assembly instructions.

Building the model

Black:

head.stl
nose.stl
eye_black_left.stl
eye_black_right.stl
leg_left.stl
leg_right.stl
body.stl
tail.stl
eyebrow_left.stl
eyebrow_right.stl
mouth.stl
mouth_crazy.stl

White:
hand_white.stl
hand_left.stl
eye_white_left.stl (with supports)
eye_white_right.stl (with supports)

Red:
tongue.stl
shorts.stl

Beige:
face.stl
face.crazy.stl

Yellow or Gold:
shoe_left.stl
shoe_right.st
shorts_dot_left.stll
shorts_dot_right.stl

Any Colour (Hidden)
body_ pin.stl

Printing and Assembly tips:

Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.

Body.stl may need supports added to the arms.

Eyes have versions with built in supports or without if you want to add your own supports.

The second picture has a much wider face. If you want to make this version then print crazy_face.stl and crazy_mouth.stl rather than face and mouth.

Do not hesitate to ask questions, feedback is essential to making better models.