Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
To hold the walls of model houses in a perfect angle of 90degree while the glue hardenes out I use 4 of this clamps.
I used neodymic magnets in different sizes, so I changed the model a bit for each size. For each clamp pair you need four identic magnets.
I found in my drawers neodymic magnets with size
- 3mm thick, 5 mm diameter
- 20mm x 4mm x 2mm
- 14mm x 4mm x 2,5mm
Printables
Tiny Magnetic Corner Clamp
Publicado em 22 de mai de 2023
40
Curtidas
270
Downloads
1
Impressões
Categoria
Tools
Tags
model
magnetic
clamp
lasercut
neodymium
90degree
modeltrains
halter
magnetisch
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (11)
Tiny Corner Clamp 5x3.f3d
94.8 KB
Tiny Corner Clamp 5x3 Outer.3mf
2.2 KB
Tiny Corner Clamp 5x3 Inner.3mf
2.1 KB
Tiny Corner Clamp 14x4x2,5 v2.f3d
92.4 KB
Tiny Corner Clamp 14x4x2,5.3mf
68.5 KB
TinyCorner Clamp 14x4x2,5 Inner.stl
2.8 KB
Tiny Corner Clamp 14x4x2,5 Outer.stl
3.4 KB
Tiny Corner Clamp 20x4x2.f3d
92.8 KB
Tiny Corner Clamp 20x4x2.3mf
70.9 KB
Tiny Corner Clamp 20x4x2 Inner.stl
2.8 KB
Tiny Corner Clamp 20x4x2 Outer.stl
3.4 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta