This is an adapter for magsafe chargers that lets you attach a popsocket poptop to it

I use the magnetic popsocket all the time, and got so used to it that it felt weird holding my phone without it when I was using the magsafe charger. Now I won't have that problem anymore!

The center piece that the poptop clips to was measured/modeled based on this: [https://www.thingiverse.com/thing:5280449](https://www.thingiverse.com/thing:5280449)

After making this, I found that the apple charger's magnetic hold was pretty weak, so I'm using the ESR brand charger that has a bit of a stronger hold.

• magsafe_popsocket is for the original apple charger
• magsafe_esr_popsocket is for the ESR brand charger: link

The same center part works for both.

The settings that worked best for me in prusa slicer are already in the 3mf files.

Printing instructions:

• center
  • the smaller the layer height the better. If you have a <0.4 nozzle that'll help with the small details
  • build supports on plate only - these will go through the two holes to support the top of the piece, tweezers get them out easily
• ring
  • To save time & not use supports, I used variable layer heights for both. The only part that really needs the thin layer is the top so that the fillet can be printed without supports