Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I designed this as a box to contain a number of push buttons. I haven't had a chance to print this out yet. If you do please post results and any issues during print.
There are 2 different tops the only difference is the number of holes and size of the holes.
Print instructions
I haven't printed this yet, however i expect it to be printable using the following settings.
Layer Height: 0.20mm or 0.30mm should be sufficient
Material: PLA or PET-G
Infill: 15%
14
Curtidas
116
Downloads
Categoria
Other Ideas
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (4)
top-plate.stl
247.7 KB
buttonbox-top.stl
107.9 KB
button-box.stl
47.2 KB
button-box-v4-v1.step
67.9 KB