All those test prints and filament swatches - what do you do with them?

Make something sustainable out of your test prints!

With the KAPLA-sized test prints and filament swatches you can combine them with your wooden bricks or use them on their own.

brick_PrinterTest:

This is a list of all the included tests:

• Overall dimensions (117.5mm x 23.4mm x 7.8mm)
• Small holes (0.8mm to 3mm)
• Thin walls (0.3mm to 2mm)
• Stringing
• Sharp corners
• Small gaps (0.1mm to 0.6mm)
• Horizontal holes
• Transparency (0.2mm to 2.4mm)
• Bridging (5mm to ~20mm)
• Overhangs
• Surfaces

basic_brick as infill swatch:

Select zero top and zero bottom layers and you will get nice infill swatches.
Choose the number of perimeters according to your taste!

brick_4x_Infill_with_modifier:

Take the .3mf file and open it with PrusaSlicer.
Include 4 different infills in one print.
Four modifiers are already prepared!

brick_xyz:

Better sized alternative to the standard xyz-cubes.