Needed a safe gasket scrapper, after buying a Permatex set I thought their handle was a little long and uncomfortable. 

**A few have been printing the handle to use with other blades requiring scaling of the handle. I used this Permatex blade as a template, measuring 39.25mm

[https://www.amazon.com/Permatex-80190-SaferScraper-Refillable-Blades/dp/B005DVHV0S/ref=asc_df_B005DVHV0S/?tag=hyprod-20&linkCode=df0&hvadid=312192374842&hvpos=&hvnetw=g&hvrand=9592057599481319256&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031142&hvtargid=pla-493520626005&psc=1](https://www.amazon.com/Permatex-80190-SaferScraper-Refillable-Blades/dp/B005DVHV0S/ref=asc_df_B005DVHV0S/?tag=hyprod-20&linkCode=df0&hvadid=312192374842&hvpos=&hvnetw=g&hvrand=9592057599481319256&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031142&hvtargid=pla-493520626005&psc=1)

Print instructions

I haven't found the best way to print the handle, typically I have just been printing with the back of the handle down and supports for the front.

The blades hold up pretty well, if you have a stubborn print they may deform a little which then you just switch it around. For $.01 a piece I would just print a sheet of them.

I have only been printing in PETG as PLA is too much of a pain for me.