Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This mount allow to fix the PSU of your microcube inside the printer structure.
STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.
There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.
Instructions:
- Print a rear holder and front holder
- Clip them in the microcube structure
- Fix the holders with zip ties.
- Put the PSU
- Block the PSU using two zip ties on the bottom of each holder
Print Settings
Printer:
RenRen 3D Pro (Kossel XL)
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Notes:
Easy to print. Use en infill of 40% at least, with good shell tickness: the parts are thin and PSU can be heavy.
Category: 3D Printer Parts
