Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
I needed a way to shorten the reverse Bowden for my ERCF so I quickly knocked this up… simple…
Needs a 32mm hole drilled through the acrylic along with 3 holes for M3 bolts. I used a cheap generic set of step drills from good old Amazon to make the 32mm hole.
Note: You may think the ball joint is quite loose, but this is intentional to prevent it binding once installed
Printables
Top Panel PTFE Pass Through
Publicado em 2 de mai de 2023
87
Curtidas
357
Downloads
2
Impressões
Categoria
Other Printer Parts & Upgrades
Tags
cool
panel
ptfe
bowden
top
pass
reverse
stuff
voron
through
bypass
ercf
Licença
Creative Commons — Attribution — Share Alike
Arquivos (7)
ball_joint_top_plate.stl
343.2 KB
[a]_ball_joint.stl
946 KB
[a]_ball_joint_ecas.stl
974.7 KB
ball_joint_core.stl
587.2 KB
ball_joint_bottom_plate.stl
197.1 KB
Top Panel PTFE Pass Through.step
1.9 MB
Top Panel PTFE Pass Through.f3d
1 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta