Made from a normal Benchy, Clay Rade's tentacles, and inspired by BUT NOT REMIXED FROM BECAUSE ITS NOT PERMITTED [https://www.printables.com/model/350583-benchy-organic-support-test](https://www.printables.com/model/350583-benchy-organic-support-test) . Also I used a random water splash model I found elsewhere for the base because I am not good at being creative. 

Gcode included in case you can't figure out how to use organic supports. It's old though, probably using prusaslicer 2.6.0 alpha 2 or 3 or something. Don't trust it I have no idea what I'm doing.

I printed mine using organic supports, generated by one of the Prusaslicer 2.6.0 alpha versions. 0.40mm nozzle 0.15m layer height as per the attached gcode.

UPDATE 2023 May 11: As per request, added kraken benchy with no benchy.stl which is just the tentacle part and base with a negative benchy volume instead of a benchy. See the pics (grey and red) for my test print/demo. You can print your own benchy and slip it in there! It might be a little tight to get in, but it's doable. As long as its… mostly to the official spec. Test print for that was .40mm nozzle .20mm layer height in PETG, sliced in Prusa 2.6.0 alpha-6 with automatic support painting then organic supports - they pulled right off with no issue.