Honey Comb Threaded Container

Let me know what you think of this Design! It would be much appreciated!

I'm curious to see how people like this remix of my previous design on my small container model. I made this for a friend of mine out of Fillamentum Timberfill Rosewood.

Print settings

Temp Nozzle	180 C
Temp Bed	60 C
Layer Height	0.2
Top Layer	8
Infill	20% Cubic
Wall Count	2
Speed	50mm/s
Retraction Distance	3.5mm
Retraction Speed	35mm/s
Supports	Normal

Recommendations

When it comes to post processing, I'd use a small Wire Brush to get into the corners to get rid any wood stringing. While my settings get ride of the most of the strings, the inner wall looks like a spider crawled in. Out walls look lovely though.

Let me know how you get on with this container and if I need to make adjustments to the model itself.

Descrição

Print settings

RecommendationsWhen it comes to post processing, I'd use a small Wire Brush to get into the corners to get rid any wood stringing. While my settings get ride of the most of the strings, the inner wall looks like a spider crawled in. Out walls look lovely though.

Recommendations

When it comes to post processing, I'd use a small Wire Brush to get into the corners to get rid any wood stringing. While my settings get ride of the most of the strings, the inner wall looks like a spider crawled in. Out walls look lovely though.