This isn't exactly a remix of MediaMan's model.  I noticed that model didn't lock quite as well as the current model from Bambu's website.  Also - the spool ID wasn't the same as Bambu's spools by a few mm, which meant that it didn't work as well with a rewinder.  So - I took the most recent (October 2022) model from Bambu and remixed it with some of the more popular features (lots of 45 degree filament retaining holes, see through hex sides, filament gauge, filament holes on the inner cylinder for winding filament).  It does seem to lock slightly better and the gauge is a little easier to read than MediaMan's.  I did the math on the gauge, so hopefully it's a little closer to accurate.  Otherwise - not much difference.  It's an improvement if you need spools, but not worth printing if you already have enough.

Print with PC or Nylon (or ABS) if you plan to use in a dehydrator.