This is a dice storage inspired by [https://www.printables.com/model/432191-twist-7-dice-storage.](https://www.printables.com/model/432191-twist-7-dice-storage.) It's a redesign and has some differences to the original model. The model is fully parametric and all dimensions can be changed using the f3d file. I've created this because I wanted to be able to use differently sized magnets than the original model.

Assembly Instructions:

You will need 6 8x3mm round magnets to assemble the model or change it to whatever size of magnets you have. Insert the magnets with a bit of superglue, making sure the magnets are aligned such that the two pieces attract each other.

Printing Instructions:

The inner part will print without supports (but then a brim is required) but works a lot better using organic support.

The outer part does not need supports, but a brim is recommended.