How could a zipper pull not have a zip tie as a part of the design? I broke all of my zipper pulls on my jacket and had to replace them so I have made this zipper pulls that utilizes a zip tie. I have made two versions, one is the original and the other one is updated such that it looks and feels better.

WHAT YOU WILL NEED:

• 2.5mm Zip tie
• Scissors or knife

INSTRUCTIONS:

1. Print the part
2.  Put the tip of the zip tie through the printed part such that the head hides within the body of the zipper pull
3. Put the zip tie through the attachment of the jacket
4. Put the zip tie through the other hole which is closest to the hole in point 2 until it passes through the whole body
5. Tighten the zip tie
6. Cut the excess zip tie
7. DONE!

Happy Printing!