Hello Everyone

I am sharing two versions of the modified Bambu Lab Scraper. I was annoyed with the original version because the Logo was placed on the wrong side. It should be visible when using Scraper. In addition, the project contained errors because the Logo is upside down and the font used is standard. I was looking for a ready-made modified project and found it but the Bambu Lab logo is printed separately and requires gluing which is pointless.  In my two versions, the logo on both sides is flush with the handle. It does not protrude and is not recessed. You print and use. I share also Scraper Stand with small and large logo. You can download individual files or a ready-made colorful .3mf project containing all versions and change only the colors of the filaments.
 

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

Feel free to download and print my latest version of Bambu Lab Scraper Stand from the link below :
[https://www.printables.com/pl/model/455625-new-bambu-lab-scraper-stand](https://www.printables.com/pl/model/455625-new-bambu-lab-scraper-stand)

IMPORTANT - READ:
Color the bottom and top logos before printing. I designed Scraper so that if you don't color the logo it won't be printed. You can also color one selected logo and the other will not be printed. This way you decide for yourself whether you will have two or one logo or maybe you will print a scraper without a logo.
 

Version 1 - Scraper - Use file number 1

• Double Sided Logo
• No space for the original magnetic tape supplied with the printer

Version 2 - Scraper - Use file number 2

• Double Sided Logo
• Space for the original magnetic tape supplied with the printer

Version 1 - Stand - Use file number 3

• Large Logo

Version 2 - Stand - Use file number 4

• Small Logo

Characteristics :

• Two versions of scraper (Magnetic - No Magnetic)
• Two version of stand (Small and Large Logo)
• Double sided scraper logo
• The logo does not require separate printing and gluing
• The logo on both sides is flush with the handle  (It does not stick out - it is not recessed)
• You can print Scraper with one logo. In this case, color only one logo - the second one will not be printed.
• You can print Scraper without the bottom and top logo - just don't color it

How to print ? :

• Material : Any
• Layer Height : 0.2mm
• Wall Loops : 2
• Bottom Layers : 4
• Top Layers : 4
• Infill : 20-30% (I print with 50% infill because I want it to be heavy and massive)
• Support : No
• Brim : No
• Brim Auto : No (Be sure to disable Brim Auto. When printing in color with Brim Auto on, it may cause a problem on the first layer)