Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This Uno Box is based on Rugged Box (Parametric) made by @Whity. I modified the size and put the UNO logo on the lid so you can print in multi colours. Inside the box is a UNO cardholder, which you can take off and put on the table. So you will have a tidy stack of Uno cards.
NOTE: it fits a standard UNO card deck (112 cards with a size of 86 x 56 mm each).
You only need 6 M3x30mm screws, and no glue is required.
I printed it with a Bambulabs X1C printer and all using Eryone PLA.
441
Curtidas
2,578
Downloads
50
Impressões
Categoria
Other Toys & Games
Tags
uno
unocard
unocardbox
unocardcase
unocardgame
unocardholder
unocase
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (21)
Uno Box - Lid.stl
400 KB
Uno - White03.stl
4 KB
Uno - RED O.stl
27.4 KB
Uno - RED 02.stl
20.4 KB
Uno - BLCK Inner 0.stl
47.2 KB
Uno - White01.stl
44.8 KB
Uno - BLCK Frame.stl
44.4 KB
Uno - Yellow N.stl
1.8 KB
Uno - RED 01.stl
32.9 KB
Uno - Yellow U.stl
24.9 KB
Uno - White04.stl
49.7 KB
Uno - WhiteFrame.stl
12.6 KB
Uno - White02.stl
96.8 KB
Uno - White05.stl
50.1 KB
Uno - White06.stl
48.3 KB
Uno Box - Latch.stl
185.3 KB
Uno - Yellow O.stl
50.1 KB
Uno - BLCK.stl
91.5 KB
Uno Box - Body.stl
408.1 KB
Uno Box.3mf
394.4 KB
Uno - CardHolder.stl
295.8 KB