Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This model what I made, built for a small and cheap testing model.
I tested it with Creality Ender 2 pro with Polymaker Polyterra PLA 1.75 used by Crealyti Slicer.
I was printed from 30 mm/s to 80 mm/s. I doesn't made more numbered pieces because I see that, the 80 mm/s is too fast, not good for bridgeing but good for walls.
The all settings was same as the first, except the printing speed.
Good luck!
8
Curtidas
212
Downloads
3
Impressões
Categoria
Test Models
Tags
bridge
test
speed
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (6)
bridgeSpeedTest30mms.stl
110.2 KB
bridgeSpeedTest40mms.stl
89.5 KB
bridgeSpeedTest50mms.stl
106.1 KB
bridgeSpeedTest60mms.stl
112 KB
bridgeSpeedTest70mms.stl
92.3 KB
bridgeSpeedTest80mms.stl
116.7 KB