Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
No magnets:
With magnets:
Print in place. No supports required. I recommend PLA and 0.2 layer height.
For the magnet version: Use 5x1mm with the thin cover, 6x3mm with the thick cover.
UPDATE: You can print the magnet version in two parts now. Just glue the two parts together. I wanted to put a design on the cover and I think this makes it a lot easier to print.
There is a mini version now: Mini Dice Book
And also please consider looking at my newest designs.
3,491
Curtidas
6,570
Downloads
94
Impressões
Categoria
Miniature Gaming Accessories
Tags
book
dnd
miniature
dungeonsanddragons
dice
printinplace
penandpaper
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (9)
Dice_Box_Latch.stl
1.6 MB
Dice_Box_Latch_Thick_Cover.stl
1.6 MB
Dice_Box_Magnets_5x1mm.stl
1.7 MB
Dice_Box_Magnets_6x3mm.stl
1.7 MB
Dice_Box_Cover_Clean_6x3mm.stl
118.7 KB
Dice_Box_Cover_Dice_6x3mm.stl
1.9 MB
Dice_Box_Case_6x3mm.stl
1.6 MB
Dice_Box_Cover_Clean_5x1mm.stl
118.7 KB
Dice_Box_Case_5x1mm.stl
1.6 MB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta