Vase mode printable ceiling light. Fits standard light pendants of 40mm like the Ikea Hemma. 

212mm diameter and 250mm high. 

The pendant holds the shade and base together. Align the holes of the base and the shade and insert screw on type pendant.

There's 2 mount types. 1 for M4 heated inserts and another to press in M4 nuts (use some superglue).

The base has 2 indents to punch or drill out where the screws need to be inserted.

Shade and Base are printed with a 0.6mm nozzle in vase mode.

Settings:

0.4mm layer height

0.9mm width

5 bottom layers of 0.4mm height (important or you don't have the holes)

10mm brim

Additional settings:

Bedslingers with a Vulcano hot end and klipper can go 20mm³/s with a 0.6mm nozzle. The speed can reach 80mm/s. So its printed in <2.5 hours.

Needed:

2x M4 heated inserts or nuts

2x M4 screws

2x Screws and/or plugs depending on your ceiling

1x Screw cap style pendant like the IKEA HEMMA [https://www.ikea.com/de/de/p/hemma-lampenaufhaengung-weiss-10386577/](https://www.ikea.com/de/de/p/hemma-lampenaufhaengung-weiss-10386577/)