Simple spool holder for Prusa Mini+ (and similar).

They sent me a wound plastic that protruded beyond the coil and I could not use the standard coil stand. Those models of holders that I found seemed to me too complicated (and requiring additional details) and I decided to simplify one of the projects as much as possible. It is now a single part and prints faster.

I successfully tested with a 920 gram coil, with a large weight, the strength may become unstable.

You will need two T-nuts 2020 and two M3 screws so as not to disassemble the base, you can print for example these [https://www.printables.com/model/96135-prusa-mini-t-nut](https://www.printables.com/model/96135-prusa-mini-t-nut)

I printed with 40% infill and 0.25 layer. Print time 2.5 hours. No support required.

_______________

(It seems I have to use the same license as the author of the original model, so I repeat it)