Wanted to clean up the pigsty that is my drawer so I came up with the breathtaking idea of using a box…

This is optimized for economic production. Therefore I chose vase mode and modified the walls to provide maximum sturdiness with minimal material usage and print time (with my Sovol SV 01 Pro and standard settings it took about 5 hours per box).

The bottom has a chamfered edge to facilitate getting small bits out.

On the top, one edge is folded inward as I wanted to be able to remove one vertically should I need to.

Dimensions are 108 x 108 x 80 mm (which was sort of ideal for a 3x3 grid in my drawer), you might need to scale the model to fit your use case.