SSD (7mm) mounting wall gizmo was designed to be compatible with the tool wall plate produced by Element System.

The tool wall plate:
[https://element-system.com/en/tool-storages/storage-sets.html](https://element-system.com/en/tool-storages/storage-sets.html)

Gizmo is divided into 2 parts so they can be easily printed.
1) Pillars - 4 pillars between the back-plate and the SSD
2) Back-Plate - mounting gizmo including the wall hooks.

Hooks on the back-plate shall be placed upwards during the printing. They are printed without any support easily.

There is also a similar gizmo for the Raspberry Pi 4 if you need it. [https://www.prusaprinters.org/prints/41737-raspberry-pi-4-mounting-wall-gizmo-elementsystem-c](https://www.prusaprinters.org/prints/41737-raspberry-pi-4-mounting-wall-gizmo-elementsystem-c)

Print instructions

Rafts: No

Supports: No

Resolution: 0.15 mm

Infill: 15%

Filament: Filament PM PLA Pearl Red