Made some minor preference changes to the Multimedia Key Deck.

Made the bottom deeper so there is more room for the wires.

Added a chamfer so support would not be needed on the upper lip.

Cut clearance for the board of the encoder.

Added a slot so the Pro Micro can be removed with a screwdriver.

Chamfered around the Micro USB hole.

Update 03/12/2023:

Uploaded V1.3 which has some more minor model changes .

Uploaded C1.1 which is for use with a type C Pro Micro (mine was 3mm longer than my Micro USB Pro Micro)

Update 03/29/2023:

QMK/VIA firmware is now publicly available, see here.

Update 04/02/2023:

Added a soldering jig to hold everything in place and figure out wire lengths.

Added C1.1.R which has a hole for a 6mm reset switch.