Quick design for starting a computer which is under a desk.
It should fit any common keyboard swich. I went with clicky for the nice auditive feedback.

You can loot an old pc for it's front panel leds and cables.
If you intend to custom make the cabling or other usecases:
The holes for the leds are 5mm exact, There is no glue involved or anything, these are nice press fit.

I had a replacement part lying around from Ali, I don't know how long the link will be valid, contact me if it isn't:
[https://nl.aliexpress.com/item/1005004794912394.html?spm=a2g0o.productlist.main.45.96eb2e793sa7wi&algo_pvid=4bf01cce-ed22-4a9a-9d9a-d2454fbbffa0&algo_exp_id=4bf01cce-ed22-4a9a-9d9a-d2454fbbffa0-22&pdp_ext_f=%7B%22sku_id%22%3A%2212000030513143146%22%7D&pdp_npi=3%40dis%21EUR%211.56%211.56%21%21%21%21%21%40211bf55216776723380016403d06c7%2112000030513143146%21sea%21BE%21790897256&curPageLogUid=zVzZiFVnws8l](https://nl.aliexpress.com/item/1005004794912394.html?spm=a2g0o.productlist.main.45.96eb2e793sa7wi&algo_pvid=4bf01cce-ed22-4a9a-9d9a-d2454fbbffa0&algo_exp_id=4bf01cce-ed22-4a9a-9d9a-d2454fbbffa0-22&pdp_ext_f=%7B%22sku_id%22%3A%2212000030513143146%22%7D&pdp_npi=3%40dis%21EUR%211.56%211.56%21%21%21%21%21%40211bf55216776723380016403d06c7%2112000030513143146%21sea%21BE%21790897256&curPageLogUid=zVzZiFVnws8l)

I used a keycap which I had lying around and painted the screws with a permanent marker.
Print it on the top side and no support is needed.