Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Very simple to print. Pieces are 3mm thick and 0.4mm of tolerance between the pieces. You may scale vertically if you wan't taller or shorter pieces. I would NOT scale along the X or Y axis because the tolerance between the pieces will not scale appropriately.
If you're going to print the ‘all_pieces_together’ file make sure the 0.4mm of tolerance between the pieces is acceptable for your printer.
I slice in CURA. I used lightening infill at 10%. My printer is a stock Sovol SV01 with BLtouch.
Thanks for watching my videos. If this is a good platform for sharing my designs I'll start to make more of them available.
