Disc sander with drill.
Need an angle grinder disc, drill adapter and bolts M6x30 3 pcs.
The drill must rotate in the correct direction (not reverse) to prevent the adapter from unscrewing from the disc.
Disc must be from hard plastic, not rubber.

The distance from the bed to the drill is 110 mm.
The bed can slide + - 10 mm.
The model is parametric and the distance of 110 mm can be changed in the file from Fusion 360.
The drill support needs to be changed for other drill models.

The bed has been slightly changed from the one in the photos.

Print instructions

PLA 0.2mm

Stand body 20% infill
Everything else 10% infill