This holder is for a set of five picks - also sold as "pick and hook set" and "test probe set". These cheap but useful picks are sold without a storage container so I decided to make this one.

The pick handles are about 5.6mm in diameter; the picks are about 133mm long overall.

The holder includes an optional "cap" which is a simple friction fit.

The OnShape 3D CAD files for this are here :

[https://cad.onshape.com/documents/92c11e18c20dade18d6e171e/w/0858edb75daeefb564ff6f7b/e/dbd65e4a951960b16b0df92b](https://cad.onshape.com/documents/92c11e18c20dade18d6e171e/w/0858edb75daeefb564ff6f7b/e/dbd65e4a951960b16b0df92b)

Print instructions

Use the 3mf file provided to print at 0.3mm resolution in PLA; otherwise :

• 5% rectilinear infill, concentric top and bottom
• perimeters = 3

Print the base right side up, and the cap upside down.