4/19/24 Update: Adjusted the clearances on the dovetail joints so the parts fit together better.

________________________________________________________________________________________________________________

2-Piece wall hook sized for small 3M Command Strips (Command Small Wire Toggle Hooks, Refill Pack). Hook is designed to cover the removal tab. To remove, simply slide the hook up from the base, exposing the Command Strip removal tab. Pull down on the Command Strip tab until the base comes off the wall.

The parts are also specifically designed to be printed without supports.

Depending on the quality of the print, you may need to trim the outer edge of the wedge on the Hook to get it to cleanly slide into the Base. (I have to trim them about 50% of the time. I could add some more clearance, but I like how tight the seams are when assembled.

I included a short and a long hook size. I designed the long hook specifically for baseball hats. (see the photo). I could design other Hook configurations. Just let me know what you need.

If you like the design, I would really appreciate your Makes and Likes! 

A larger version can be found at:

[https://www.printables.com/model/402355-medium-wall-hook](https://www.printables.com/model/402355-medium-wall-hook)