Since I did not manage to find an existing print which fit my LCR-T3, I created mine.

I used 3 M3x5 screws to secure the tester, and a M3x12 screw to create the thread in each hole. Due to poor board layout, a fourth screw cannot be used. Note that spacing could be improved, to better center the button, or adjust the size of some cuts.

Model displayed in photos is printed with a basic PLA (not so great), with 0.3mm setting, 20% infill, 3 perimeters and thin walls detection.

Reference of the LCR-T3 tester : [https://www.aliexpress.com/item/1908731704.html](https://www.aliexpress.com/item/1908731704.html)
Inspiration : [https://www.prusaprinters.org/prints/34496-lcr-t3-component-tester-enclosure](https://www.prusaprinters.org/prints/34496-lcr-t3-component-tester-enclosure)