A light diffuser/holder for string or strip LEDs in the Lack Enclosure

Print instructions

Printing 2 per side will fit in between the enclosure legs.

Model is pre-positioned.

You will need 2 small wood screws per diffuser.

Use 3 perimeters - it will actually decrease printing time by 30 min for each diffuser.

PETG recommended.

Use transparent for the whole thing or add a color change at 9.60 to give it a built in light blocker for the outsides.

Run your LED strips through these and the light will be nicely even all over!

Should work with most LED string or strip lights.