Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A stack-able , lockable, cubic drawer box with drawers. Designed for organising my screws. But useful for a lot of other tasks, like small electronic components.
The Drawers feature a small cutout for a label.
The box is very rigid, but has thin walls where possible. Its designed to be filled with metal.
Designed for 0.4 mm nozzle and 0.15 mm layer height.
Tolerances are tight, you should use a 0.4 nozzle.
For the Hinge assembly you will need 2 PT-Screws (for plastic) with a 2mm outer diameter and 4mm length. With a pan head. I used this one:
(screw in preview image is to long, but its the correct product, i recommend the box with an wide assortment of PT screws)
Print instructions
Category: Containers Summary
A stack-able , lockable, cubic drawer box with drawers. Designed for organising my screws. But useful for a lot of other tasks, like small electronic components.
The Drawers feature a small cutout for a label.
The box is very rigid, but has thin walls where possible. Its designed to be filled with metal.
Designed for 0.4 mm nozzle and 0.15 mm layer height.
Tolerances are tight, you should use a 0.4 nozzle.
For the Hinge assembly you will need 2 PT-Screws (for plastic) with a 2mm outer diameter and 4mm length. With a pan head. I used this one:
(screw in preview image is to long, but its the correct product, i recommend the box with an wide assortment of PT screws)
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.15
Infill: 30%
Notes:
Supports needed only for the Hinge
Infill only needed for the Body
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta