Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Just a quick camera enclosure / stand I whipped up for my Raspberry Pi.
Be aware: this enclosure does not fit the v1.3 camera!
Print instructions
Category: Camera Summary
Just a quick camera enclosure / stand I whipped up for my Raspberry Pi.
Be aware: this enclosure does not fit the v1.3 camera!
Instructions
Not much assembly required. Just print the 3 parts, grab a 3mm x 25mm screw and nut.
The tolerance for the lid is .25mm which works good for PLA on my 3D printers. I've added the design files (.f3d or .igs) if you need to make adjustments.
Made in Inventor Fusion for the Mac.
87
Curtidas
877
Downloads
15
Impressões
Categoria
Electronics
Tags
camera
stand
enclosure
raspberry
pi
thingiverse
Licença
Creative Commons — Attribution — Share Alike
Arquivos (6)
camera_back_cover_v002.stl
98.3 KB
camera_stand_v001.f3d
164.9 KB
camera_stand_v001.stl
223.9 KB
camera_back_cover_v002.f3d
95.9 KB
camera_front_box_v003.f3d
91.1 KB
camera_front_box_v003.stl
478.7 KB