Wildlands Single Box Insert

This insert fits everything for Wildlands in the base box (about 31mm of lid lift).

Base Game
Unquiet Dead
Adventuring Party
Roses and Thorns
Map Pack 1
Map Pack 2
The Ancients

You need to print out the following files:

6x Player Box v2
1x Ancients Box
1x Ancients Mini Box
1x Map Cards
1x Roses Thorns Expansion
1x Box Damage Token (print with supports)
1x Box Damage Lid (optional, the token box should sit flush and not need this)
1x Minions tokens (found here by 77endymion77: [https://cdn.thingiverse.com/assets/1b/68/d3/66/b4/tokens.stl](https://cdn.thingiverse.com/assets/1b/68/d3/66/b4/tokens.stl))

I also created a pdf file for dividers for the ancients cards that is shared on my google drive (it will also be on bgg if I can get the permissions). Print double-sided, flip on long edge. [https://drive.google.com/file/d/1Zm7zRctLGyttGjQqM-gxj9zzvGOkxmC6/view?usp=sharing](https://drive.google.com/file/d/1Zm7zRctLGyttGjQqM-gxj9zzvGOkxmC6/view?usp=sharing)

There is also a little extra space around the box, I'm debating designing a quick simple space filler, or just using foam to fill the space, if anyone likes this design and would like something designed to keep everything tight, let me know and I'll make it. Feedback in general also welcome!

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

Supports:

Resolution:

Infill:

Filament: eSun PLA+ fire engine red

Notes:

The only file that requires supports is the damage token box (there is a 2mm hole in the bottom so it will fit over the top of the minion token tray)

I printed everything with 0 top/bottom layers to save a significant about of filament. If you prefer a solid bottom, you can lower the infill settings to whatever your preference is (I normally use 10%)

This design uses approx 400g of filament and total print time is roughly 33 hours.

Category: Toy & Game Accessories

Descrição

Print Settings