There are 3 versions, one with sharp edges and one with rounded edges (to protect the plants or the fingers). The third is an in-between.

The walls are thin ( 2.8mm) to reduce the use of material, I recommend to make 100% concentric infill . The bottom is 2.2mm thick. It's best to use 0.2mm layers but 0.3 work nice.

• /!\ Your profile needs to be finely tuned, the pot will leak if the seam is not well merged. I my case, I simply removed the seam with a random start layer /!\

The hole is 101mm wide, for a 10cm pot (maximum width is 123 mm). To have a 12cm hole, scale up the model to 120%.