This is a toothpick holder has a screw-on bottom for refills and a plug on the top that slides back to allow the toothpicks to be shaken out easily and quickly.  The access hole is on the edge of the cylinder so you can more easily get out that last toothpick.  

Will fit 66mm long toothpicks without issue.  Should fit 68mm long toothpicks at a slightly reduced capacity.

Printing Details:

• material: PETG (The plug uses a compliant mechanism to snap into place, and was designed for the flexibility of PETG)
• Perimeters: 3
• Layer Height: 0.2mm