This is a replacement handle for the scraper that comes with the Anycubic i3 Mega.
So if you don't like the wooden handle, you can print this handle in any color you like!

In terms of hardware you will need three M3x14 bolts and three M3 nuts for assembly. It would be possible to use 12mm long bolts, but those probably wouldn't screw into the nuts all the way. You can buy the hardware using the AliExpress link below.

Support

If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: [https://s.click.aliexpress.com/e/_oFT8Gq6](https://s.click.aliexpress.com/e/_oFT8Gq6)

Whenever you buy something through this link, I get a small kickback without costs for you ;)

Thanks for your support!

Print Settings

Printer Brand: Anycubic

Printer: All-metal Mega

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20%

Filament: ColorFabb nGen Gray Metallic
Notes:

The infill percentage is relatively low (for such a part that needs quite some strength), but I used 4 top layers, 3 perimeters and 4 top layers. This gives the parts enough strength.