Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This OpenSCAD file creates a box and a lid that respect a couple of aspects:
- rounded corners and edges favourable for certain printers
- lid with a friction fit
- inner dimension customisable
- wall thickness customisable (defaults to 2 mm)
The STLs are designed to hold a double AA battery holder with enough clearance to allow a KF2510 2-pin connector being pushed through the hole in the lid. See the photo. The connector in turn can hold a LED. (Always use a resistor and don't connect the LED directly to the battery!)
Category: Tool Holders & Boxes
12
Curtidas
142
Downloads
Categoria
Tools
Tags
parametric
openscad
thingiverse
Licença
Creative Commons — Public Domain
Arquivos (3)
simple_parametric_box.scad
2.6 KB
simple_parametric_box_body.stl
85.1 KB
simple_parametric_box_lid.stl
99.5 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta