Do you want to honor your subscriber milestone with a play button of your very own? Why wait for google to send you one when you can 3D print one yourself!

This was designed and printed to honor my channel's recent surpassing of 50,000 subscribers, and I think this model turned out very nice! Swapping colors mid-print makes the button pop a lot more than just printing it in one solid color.

My youtube channel: [http://Lazerlord.com](http://Lazerlord.com)

Print instructions

Category: Signs & Logos Summary

Do you want to honor your subscriber milestone with a play button of your very own? Why wait for google to send you one when you can 3D print one yourself!

This was designed and printed to honor my channel's recent surpassing of 50,000 subscribers, and I think this model turned out very nice! Swapping colors mid-print makes the button pop a lot more than just printing it in one solid color.

My youtube channel: [http://Lazerlord.com](http://Lazerlord.com)

Print Settings

Printer: Folger Tech FT-5

Rafts: No

Supports: No

Resolution: 0.1mm

Infill: Meh

Notes:

To get the multi-color effect that I demonstrated, you need to swap out the material to a different color twice during the print. When the printer starts to print the very bottom of the triangle, stop the print and swap to a different color. After that, there will be an area where the chamfer on the top starts to form. After that, you can swap the material color once more. The longer you wait, the thicker the outline will be. Just make sure to swap out the color before it finishes the final layer, or else you'll only have 2 colors!