Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
So I wanted to make a small assembly project.... So I made a box for my Mouse of all things.
The Pictures show a Case with logo but there is no logo in the files.
I used M3 threaded inserts and M3 screws for this project.
Button-head screws for everything except for the screw for the locking mechanism. For that I used a countersunk M3.
I believe you can get away with using 8 to 12 mm length for all screws.
If I could remember where I had the screws and inserts from I would post it. But It was something I just had laying around.
98
Curtidas
543
Downloads
6
Impressões
Categoria
Other Gadgets
Tags
box
case
storage
storagebox
flightcase
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (12)
lockrod.stp
5.6 KB
lockrod.stl
141.5 KB
henge.stp
40.1 KB
henge.stl
693.5 KB
locktop_v3.stp
100 KB
locknottom_v3_1.stp
107.6 KB
locknottom_v3_1.stl
573.4 KB
mouseboxtop.stp
480.3 KB
mouseboxbottom.stp
526.4 KB
locktop_v3.stl
635.3 KB
mouseboxbottom.stl
36.5 MB
mouseboxtop.stl
38.5 MB