I have tried to include any and all pieces of pertinent information for this model, but ultimately you will want to slice the models to your needs. I test every model before I release it (most of the time with a 0.6 mm nozzle), and below are my suggestions based on clearances, thicknesses, and what I believe will help the model function as intended once you have printed it. Please feel free to let me know if I have missed anything or if you need to know anything else!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This design is uploaded with a non-commercial license. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at [https://www.patreon.com/thinair3D](https://www.patreon.com/thinair3D)

Printing Info  

FDM or Resin: Either (I've only printed FDM so far) 
Scaling: All Low Poly Pokemon are currently at the smallest scale I like to FDM print them at, but you can scale up or down in the slicer as you please and they should be fine. 
Supports: None 
Infill/Perimeters: Your preference, but since they are decorative you would be good with very little. 
Nozzle Size: I printed with 0.6 mm with no issues, any large might cause problems on the thinner parts.