3D printed Dough Scraper by Gozney. The assembly should be pressfit without glue, soft blow hammer or standard hammer needed. Fit the blade into the handle (alternatively help it in with the hammer) and hammer in the pins to finish the assembly. Happy printing and happy pizzaing! :D

Blade:

• 0.4mm N
• 0.1mm LH
• 100% infill
• Infill, Solid infill with 0.7mm extrusion width to save time
• Change color on layer height 2.6 mm for lettering

Handle:

• 0.4mm N
• 0.2mm LH
• 100% infill
• Infill, Solid infill with 0.7mm extrusion width to save time

Pins:

• Default PLA profile 0.2mm LH