Overview

Pokémon fans unite with this playful Oddish bobble!  Enjoy watching Oddish bounce to and fro with the addition of 3D Printy's bobble-head springs.

Printing

I printed using PLA on the Prusa i3 MK3 with variable layer height to help with the curvature on the bottom of Oddish's body.  The included g-code does use variable layer height and will print all 3 parts.  The bottom layers start at 0.1mm and it changes to 0.2mm just before the leaves on top of Oddish's head.  I recommend using some glue on the print bed if you are having issues printing at 0.1mm layer height.

I also included the g-code and STLs from 3D Printy's original stiff spring and base designs for ease of printing.  Since the bobble is a little large, I recommend using the stiff spring version and you can find more base options on 3D Printy's original design page.

The STLs are included if you do want to re-slice to re-size.  To properly orient the legs for printing, I recommend rotating them about 35 degrees so the bottoms of the feet are parallel to the print bed.  For supports, I omitted them from the leg and spring holes on Oddish's body and the leaves, since those can be bridged, but you do you.  I definitely recommend using supports for the bottom of the body and feet to help that curvature print clean.

To assemble, just use a little super glue to attach the spring and legs to Oddish's body and then watch it bounce!

Please like it if you do and leave any comments!  If you're really feeling generous please consider buying me a coffee so I can keep creating!

Check out my TikTok!

Check out my YouTube!

If you like what you see, please consider joining my Patreon.

Note: Pokémon is a registered trademark of Nintendo so this model is not permitted for commercial use.