Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a simple keycap with Pikachu on it.
The original model comes from [https://www.thingiverse.com/thing:1200732](https://www.thingiverse.com/thing:1200732) but I converted the model to STL and oriented it in the way you should print it.
The model on the pictures was printed on an Anycubic Vyper.
- No supports (make sure to enable bridging in Cura)
- Layer height: 0.16mm (the lower the better, the Pikachu is pretty small)
- Nozzle width: 0.4mm
- Infill: 20% cubic subdivision, but anything will probably work
- Print time: around 35 min
29
Curtidas
131
Downloads
1
Impressões
Categoria
Computers
Tags
pikachu
pokemon
keycap
cherrymx
Licença
Creative Commons — Attribution — Noncommercial — Share Alike
Arquivos (1)
Pikachu Keycap.stl
66.7 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta