Example Photos : alexfiel.com/wiggle

After stumbling across some of Kirby Gladstein's photography, I wanted to see if I could recreate the effect with my Sony a6300 mirrorless camera! I used Autodesk Fusion 360 to design the parts and printed out the majority on my Creality CR-10. The lenses themselves were scavenged from used disposable cameras. The camera's small sensor doesn't give me the same width as the Nishika N8000 that Kirby uses, but I got some great depth even with the lenses only ~8mm apart!

Design inspired by similar projects by Joshua Bird and George Moua ✨

Besides 3D printed parts, this model needs three 11mm lenses from disposable cameras and some 5.95mm BB's for the bearing.

Full design / build is on Instructables.